5kW Automatic Busbar Inspection Line For Batch Inspecting
1) High voltage withstanding and insulation testing.
2) Testing result can be keep in computer for record.
testing report can be saved, printed on site and recorded remotely.
Its format can be set according to customer’s requirements.
Automatic Busbar Inspection Line is composed of three parts,
feeding positioning station, inspection station and discharge
station. When the busbar enters the feeding position, the control
system will select the right testing fixture to start testing from
the information identified by bar code or previous assembly line.
Three tests will be performed including HV withstanding test,
insulation resistance test and grounding test. After test is
finished, testing report will be generated. This report can be
saved, printed on site and recorded remotely. Its format can be set
according to customer’s requirements. Automatic inspection machine
is mainly used for batch inspecting on the straight busbar. Elbow
busbar type shall be tested on manual inspection machine.
Equipment data on automatic busbar inspection line
|Busbar Type||Straight length type|
|Position Type||Unilateral / Middle|
2 min/piece(testing time is adjustable.)
|Servo Nos||2 axis( Z axis/X axis)|
Phase error judgment( optional)
Bar code printing/ Report printing( optional)
High Voltage Withstanding Test
|380~415VAC 50~60Hz 5kW|